Maxfli logo

Let Your Game Do the Talking

GolfWorks Tour Set Epoxy

About This Item

Tour Set epoxy combines the strength of long-cure epoxies with the conveniences of shorter cure epoxies. Tour Set has a gel time of approximately 12 minutes, which allows for more clubs to be shafted (even a complete set ) before gelling than with other quick set epoxies. Cures to playing strength in 60-90 minutes, depending on temperature.

  • Brand : Golfworks
  • Country of Origin : Imported
  • Web ID: PAPMICCOMMNCJICL
  • SKU: 11578029

REVIEWS

3.6
67%
Recommended

14 Reviews

Not Good, At All

Came hardened. I ended up getting it to work and waited a week. It was mixed perfectly and still I could twist my head. Yes, I prepared my shaft tip and adapter properly. Just not good epoxy.

Epoxy Not Useable

The hardener was allready hard when I opened the syringe. I tried to use the thick dark substance and blend in the clear liquid until it was a dark grey. It never setup

SMH Disgusted

Unusable Product Golfworks Tour Set Epoxy

I purchased the golfworks Tour Set Epoxy Item PSSE VB1207-50 the clear component was hardened prior to use. I can't be dispensed. This appears to be a known issue based on pervious reviews. I have a good history with GolfWorks in the past but it may have just ended.

EndTheCabal

Exactly What I Wanted

I bought this because I like trying different shafts. I have been changing my own shafts since the 90's. This applicator is much much cleaner and easier to deal with.

Surferboy

So Far, Works Great!

I bought this to re-attach the head of my 5 iron. Since my previous epoxy is about 30 years old, I decided to try fresh epoxy. My 5 iron is holding up well through many mis-hits.

Hardened On Arrival

The hardener part was already set on arrival. Purchased twice. Same result borh times. GG was less than helpful. Going to PGASS instead

rms2k

Epoxy

Worked great. Replaced my club heads the night before my next round. Worked perfectly.

Sets Fast!

I used this to install metal shaft extensions. After you mix it, work fast, because this stuff sets up quickly. If you have the extensions lined up and ready to install, you might install two of them before it gets tacky. Just mix small batches at a time. Easy.

Great Product If You Need To Use Club Soon!

Need it ready to play in a couple of hours this is your epoxy. Set time doesn't allow for goofing off, you better have all your i's dotted and t crossed because it sets up fast.

Easy To Use Product

Easy to use product and great advice from the Galaxy store crew on how to best use the product.

Best To Use For Quick Repairs

I bought this to use to help with the ferrules sliding on the shaft of the club. Great to use, sets quick, and you don't need to use a lot!

Product Mixes Easily Right Out Of Package.

No guessing about quantity of product for mixing purposes. Dispenses equally and easily every time. Easy to use. An inexpensive and fast way to assemble clubs at home. I rely on GolfWorks 12 minute tour set epoxy for all of my club assembling needs. Sincere thanks.

Difficult To Get Hardener Out Of The Tube

The hardener side was very difficult to use with the plunger design

Fast Worker.

Used this epoxy with steel tube extensions to lengthen a new iron set. Not the best dispenser design - the plunger sets up a little wonky and it is little uncertain whether the glue and hardener dispense in equal portions so you've got to pay attention. After mixing it tacks up fast noticable thickening within 5 minutes - tough to spread after 7 minutes so you've got to work fast or you wind up with lots of waste. Good, solid set and seems like tough stuff that does the job.

Read All Reviews (14)