Promotion Details
+ / - Hover over image to Zoom

PING Women's G30 Driver

You save: $100.00 (29%)
Hand: Right Hand
Loft: 10.0° SF Tec
Flex: Ladies Flex
Shaft: TFC 80D Graphite


In Stock In Stock

The green has never looked closer than with the PING Women's G30 Driver. High strength / weight ratio allow for a thinner, hotter face. Thin clubhead walls stabilize sound and save weight which can be used in other areas of the club. Adjustable hosel technology gives you the ability to tweak your driver to match course conditions. An increased MOI creates more consistent distance and improved accuracy on every shot. Finished off with a complementary shaft for ideal trajectory, control, distance and accuracy.

PING Men's G30 Driver

Crown Turbulators

  • Improved aerodynamics
  • Reduces drag forces
  • Increased clubhead speed
  • Greater distance from the tee

PING Men's G30 Driver

Adjustable Hosel Technology

  • Fine-tune your club trajectory
  • Add or subtract 1° of loft to perfect your driver
  • Additional adjustability is achieved without adding additional weight

PING Men's G30 Driver

Optimal CG Placement

  • CG is positioned low and back
  • Increased MOI and reduced spin
  • Longer, straighter drives

PING Men's G30 Driver

Variable Face Thickness

  • Thin face composition near the sweet spot for maximum flexing and distance
  • Thicker outer face areas for excellent forgiveness on mis-hits
  • Greater consistency around the course, swing-after-swing

Additional Details

  • SF (Straight Flight) Tec models are available in 10° and 12° loft options and feature heel weighting that promotes a straighter ball flight
  • T9S face material has a higher strength/weight ratio
  • Thinner, hotter face adds distance and is more forgiving
  • Thin crown walls help stabilize sound and save weight
  • Increased perimeter weighting
  • TFC 419D shaft has a higher balance point that can accommodate a heavier head
  • Tour 65 and 80 shafts have a lower trajectory for added control

  • Brand: PING
  • Country of Origin: Imported
Specifications Loft Length Adjustability Model
10.0° 10.0° 45.0" ±1.0° SF Tec
10.5° 10.5° 45.0" ±1.0° Standard
12.0° 12.0° 45.0" ±1.0° SF Tec